No results were found for the filter!
Multi-sensor MS Mounting bracket for installation in the elevator shaft to accommodate the USB 501 detector base for the MSD 523-E smoke detector dimensions (H x W x D): 80 x 105 x 110 mm Material: steel, galvanized
Preis auf Anfrage
Multi-sensor MS Multisensor MS for automatic ventilation control in dry rooms depending on the room air values temperature, humidity and CO 2 content It also has an integrated ventilation pushbutton. Due to the clear visual display, all values can be...
Preis auf Anfrage
Multi-sensor MS Smoke switch ORS 142/MS for smoke monitoring For smoke monitoring of the evacuation levels of passenger elevators and forwarding of an alarm message to the elevator shaft control. Rated operating voltage: 18 to 28 V DC Relay contacts...
Preis auf Anfrage
Rain sensor RM/2 24V Connects to 24 V DC SHE and ventilation control panels and 230 V AC wind/rain detection panels. Integrated electronic assessment of rain alerts. Heated sensor surface, dependent on the outdoor temperature. Supply voltage: 20-30 V DC, or...
Preis auf Anfrage
Wind/rain sensor WRM/2 24V WRM/2 24V wind and rain detector for connection to 24 V DC SHEV and ventilation control panels and 230 V AC wind/rain detection control panels With built-in evaluation electronics for wind and rain detection. Outside temperature...
Preis auf Anfrage
Standpipe SR-400 Standpipe for WRM/2 24V wind/rain sensor and RM/2 24V rain sensor. Supports a favourable flow position when mounting sensors, e.g., on flat roofs Dimensions (H x W x D): 1,000 x 245 x 245 mm Material: Plastic
Preis auf Anfrage
Temperature sensor TS-1030/AP Temperature sensor TS-1030/AP for automatic ventilation control via room temperature for use in dry environments With setpoint adjuster +5 °C to +30 °C. Technical data: Switching contact: 1 changeover contact Dimensions (H x W x D): 70 x...
Preis auf Anfrage
Temperature sensor TS-1030/UP Automatically controls the ventilation based on room temperature, for use in dry environments. +5 °C to +30 °C set point adjustment. Optional surface (AP) or flush mounting (UP). Switch contact: 1 x changeover Dimensions (H x W x D): 70...
Preis auf Anfrage
Humidity sensor FS-3095/AP Humidity sensor FS-3095/AP for automatic ventilation control via room humidity Technical data: With setpoint adjuster 30-95 % relative humidity Switching contact: 1 change-over contact Dimensions (H x W x D): 75 x 75 x 25.5 mm Colour:...
Preis auf Anfrage
humidity sensor FS-3095/UP Automatically controls the ventilation based on room humidity. Optional surface (AP) or flush mounting (UP) 30–95 % relative humidity set point adjustment Switch contact: 1 x changeover Dimensions (H x W x D): 75 x 75 x 25.5 mm Colour:...
Preis auf Anfrage
Viewed