No results were found for the filter!
NEW
Optical smoke switch ORS 142 For smoke monitoring of the evacuation levels of passenger elevators and forwarding of an alarm message to the elevator shaft control. Technical data Rated operating voltage: 18 to 28 V DC Relay contacts switching voltage: max. 30 V DC...
Preis auf Anfrage
Wind/rain sensor WRM/2 24V WRM/2 24V wind and rain detector for connection to 24 V DC SHEV and ventilation control panels and 230 V AC wind/rain detection control panels With built-in evaluation electronics for wind and rain detection. Outside temperature...
Preis auf Anfrage
Rain sensor RM/2 24V Connects to 24 V DC SHE and ventilation control panels and 230 V AC wind/rain detection panels. Integrated electronic assessment of rain alerts. Heated sensor surface, dependent on the outdoor temperature. Technical data Supply voltage:...
Preis auf Anfrage
Standpipe SR-400 Standpipe for WRM/2 24V wind/rain sensor and RM/2 24V rain sensor. Supports a favourable flow position when mounting sensors, e.g., on flat roofs Dimensions (H x W x D): 1,000 x 245 x 245 mm Material: Plastic
Preis auf Anfrage
Temperature sensor TS-1030 With setpoint adjuster +5 °C to +30 °C. Technical data surface-mounted Switching contact: 1 changeover contact Dimensions (H x W x D): 70 x 70 x 26 mm Connections: 2 x 2 x 0.8 mm² (at 24 V DC), 4 x 1.5 mm² incl. PE (at 230 V AC)...
Preis auf Anfrage
Humidity sensor FS-3095 Technical data Surface-mounted 30–95 % relative humidity set point adjustment Switch contact: 1 x changeover Dimensions (H x W x D): 75 x 75 x 25.5 mm Colour: White Supply cable requirement: 2 x 2 x 0.8 mm² (24 V), 4 x 1.5 mm² incl. PE...
Preis auf Anfrage
Multi-sensor MS Mounting bracket for installation in the elevator shaft to accommodate the USB 501 detector base for the MSD 523-E smoke detector Technical data dimensions (H x W x D): 80 x 105 x 110 mm Material: steel, galvanized
Preis auf Anfrage
Viewed