Synchronous module SM3 3.5A/2.5A/B for linear drive M1 1000 N

Preis auf Anfrage

Prices incl. VAT plus shipping costs

Delivery time approx. 5 working days

  • 13368011035
Synchronous module SM3 3.5A/2.5A/B for linear actuator M1 1000 N with signal transmitter For... more
Product information "Synchronous module SM3 3.5A/2.5A/B for linear drive M1 1000 N"

Synchronous module SM3 3.5A/2.5A/B for linear actuator M1 1000 N with signal transmitter


For operating two actuators on one window or on one roof flap.

The synchronous module SM3 is a microprocessor-controlled synchronous operation and shut-off control for simultaneous operation of two smoke extraction and/or ventilation drives 24 V DC on one opening element (sash/dome etc.). The design of the synchronous module is determined by the application and the current consumption of the drives.

Advantages/features

For operating two drives with signal transmitters, without limit switches, without built-in load disconnection
Safe operation for stroke widths up to 1000 mm, independent of the running times of the drives and the material of the windows or roof flaps.
Up to 10 m permissible cable length between SM3 and drives
Compensation of possible running time differences through integrated overrun times n CLOSE direction
Factory preset switch-off thresholds for raising and lowering operation
Additional configuration options via the service port interface
Configurable signalling contact
Areas of application

For operating two drives with signal transmitters, without limit switches, without built-in load disconnection

Device characteristics

If load-related differences occur, they are automatically compensated and exact synchronisation is ensured
In the end positions and in case of overload in the intermediate positions, the drives are switched off by the integrated current-dependent overload cut-off.
After reaching the end position, the synchronous module locks against multiple actuation in the same direction and can only be controlled in the opposite direction.
Defective or missing drives are detected and the control of other connected drives is prevented.
Technical data

Electrical characteristics

Rated voltage: 24 V DC (-20 % /+25 %)
Permissible ripple of the nominal voltage: 2 Vpp
Cut-off: integrated electronic load cut-off, cut-off values depend on the connected drive,
Protection class: III
Mechanical properties
Dimensions (L x H x D): 110 x 110 x 66.7 mm
Electrical connection
Connection: 4-pole to the drives, 2-pole (3-pole with line monitoring) on site
Connection terminals: max. 6 mm2 for motor supply line, max. 2.5 mm2 for forwarding, max. 1.5 mm2 for drives and signal lines
Safety switch-off: at undervoltage < 17.5 V, wire breakage, blockage after 5 activations in the same direction
Max. Max. cable length: between control unit and drive: 10 m
Potential-free signalling contact: Ohmic load, max. 1 A/60 V DC (SELV)
Installation and ambient conditions
Ambient temperature: 0 °C to +70 °C
Protection class: IP 54

Related links to "Synchronous module SM3 3.5A/2.5A/B for linear drive M1 1000 N"
Available downloads:
Fragen und Antworten mehr
Hier finden Sie die häufigsten Fragen und die dazugehörigen Antworten zu diesem Artikel.
Eine Frage zum Artikel stellen

Die mit einem * markierten Felder sind Pflichtfelder. Die E-Mail wird nicht veröffentlicht.

Vielen Dank für das Stellen einer Frage. Wir werden versuchen, diese schnellstmöglichst zu beantworten.
Read, write and discuss reviews... more
Customer evaluation for "Synchronous module SM3 3.5A/2.5A/B for linear drive M1 1000 N"
Write an evaluation
Evaluations will be activated after verification.

The fields marked with * are required.

I have read the data protection information.

Viewed