- Order number: 65213000
Linear drive M3 300-500 mm 250 N
Ventilation linear drive for use in roof flaps and skylights as well as skylight domes and arcade rooflights. The M3 is operated with 230 V mains voltage and can therefore be used without a ballast unit
Advantages/features:
- Compact drive in rectangular aluminum profile without any disturbing attachments
- Tight closing without limit switch adjustment with integrated electronic load cut-off, thus always tight closing of the window flaps, no limit switch adjustment required
- Dust-tight and splash-proof (protection class IP 44)
- Sheath and push tube made of aluminum alloy, thus corrosion-free
- Potential-free contact for message "Not CLOSED" (contact closes when leaving position CLOSED)
Material:
- Housing: Aluminum
- End caps: Plastic, black
- Color: EV1/silver, anodized or on request in RAL colors
Technical data:
- Rated voltage: 230 V AC/50 Hz (-15 % /+10 %)
- Rated current: approx. 0.2 A
- Cut-off: electronic load cut-off, built-in
- protection class II
- Stroke length: 300 mm
- Compressive force: max. 500 N
- Pulling force: max. 250 N
- Clamping force: 2000 N
- Running speed: approx. 10 mm/s
- Duty cycle: ED 30 (10 min)
- Service life: > 10,000 cycles
- Dimensions (L x H x D): (stroke + approx. 133 mm) x 82.5 mm x 41 mm
- Connection cable: 5 x 0.75 mm², length approx. 1.60 m, gray
- Ambient temperature: -5 °C to +75 °C
- Protection class: IP 44
Subject to technical changes; illustrations not binding.
With our free tool, you can find customized suggestions for the right drive for your requirements in the façade or on the roof in no time at all based on the window automation data you enter
voltage drive: | 230 V AC |
Application: | Ventilation |
Tractive force [N]: | 250 |
series: | M3 |
Compressive force [N): | 500 |
Stroke [mm]: | 300 |
Approvals and certificates: | TüV type tested |
- Do you have any questions concerning this product?
- Heinze LV-Texte
- Further products by Kingspan STG GmbH
Besteht die Möglichkeit, bei Kingspan STG Antrieben den Hub nachträglich zu verkürzen?
Ja, diese Möglichkeit besteht. Bauartbedingt entweder durch Softwarekonfiguration oder durch mechanische Hubbegrenzung. Die mechanische Hubbegrenzung ist ausschließlich werkseitig möglich.